Pack altivario Syride Sys\'Evolution...
Carbon propeler cut for the Miniplane...
Carbon propeler cut for the Miniplane engine Top80 and manufactured in France
Reduction ratio: 19/73 3.842
Warning: Last items in stock!
The E-PROPS brand is a rising reference in the world of 100% carbon paramotor propellers.
Its propellers, designed and manufactured specifically for paramotor use, offer according to the manufacturer:
Thanks to efficient production methods, these propellers offer an attractive price performance ratio.
1.1 daNm with 6mm screws
2.0 daNm with 8mm screws
The tightening torque will be applied in 3 successive operations and gradually. The tightening torque of each operation will be equal to one third of the nominal value.
During tightening, a slight settling of the material is normal around the flange and the hub. The tightening torque must be checked after the first hour of flight, and thereafter as many times as necessary and at least every 25 hours.
Verification of the tracking of the propeller mounted on the engine:
This is a very important control that anyone can do to see if the propeller is bent or deformed asymmetrically. Start by rotating the propeller until one of the blades is pointing down. Now place a support (eg block of wood) directly under the blade and mark the exact path of the blade on the support. With the support still in place, rotate the propeller on the next blade. On the support, the trace of each blade must be perfectly aligned with the mark of the previous one. If the blade passes to a different location, it indicates that the blade has been bent in one way or another and should be replaced immediately.
The maximum tolerance of propeller tracking is 10 mm.
Max speed: 3000 rpm
Max power: 35ch on motor with reduction
The cleaning of a carbon propeller is done with a sponge, with soapy water or a glass product. Drying can be done with a chamois leather.
Small impacts are easily repaired (epoxy resin, araldite, light sanding). For larger repairs, contact us.
The PLUG'n'FLY Models:
PLUG'n'FLY propellers are 100% carbon, lightweight and resistant, with shielded leading edge, simple to assemble and disassemble thanks to the two nestable parts.